The idea was to assemble the cheapest and most straightforward tinkering set for beginners. It’s designed to be used in a huge Workshop at a conference. All parts together (including packaging) cost less than 1 EUR.
-
Recent Posts
- Calliope mini 2.0 – Flash Memory for 20 programs
- Calliope mini as a maker tool
- 3D Modeling for 3D Printing
- Powering Arduino from a Capacitor
- Crappy Arduino M0+ Pro
- How to flash an Arduino over the Air with Bluetooth
- Control your Arduino with Scratch over Bluetooth
- There shall be sensors, Mysensors…
- How to fire an IFTT Event with a custom http request
- Waking up an Arduino with Input from a Sensor
Recent Comments
- re:cap "Finding Europe with Lights" - ubirch.blog on Building a cellular tracker: Part0 – Why future IoT Devices might run on GSM and not Wifi
- Rohit Singh on Drone with Raspberry and Arduino/Multiwii (part 1)
- themikemachine on Building a cellular tracker: Part4 – Which cloud-service to chose for storing the data
- quadrocopterversicherung.com on Drone with Raspberry and Arduino/Multiwii (part 1)
- Malcolm on Waking up an Arduino with Input from a Sensor
Archives
Categories
- Follow Making connected stuff on WordPress.com
Blogroll
Making connected stuff 